The transducers above may be used with ST40, i40, i50 and ST60+ displays (as repeaters only) on the SeaTalk1network via aSeaTalk to SeaTalkngconvertor(right).
Please note that ST40/i40/i50 and ST60+ displays will only work as repeaters if used with the above transducers. You cannot calibrate the transducers from these instruments. For calibration you would require a following SeaTalknginstrument: ST70, ST70+ or i70 display in your network.
If you don't have an ST70/ST70+ or i70 in your system, then we advise you use an analogue Transducer in one of the following Tabs:
Depth, Speed, Temperature
The transducers above may be used with the ST70, ST70+ and i70 on the SeaTalkngnetwork. The transducer connects directly to the backbone - no pod or iTC-5 is required.